Cowl Hinges Started (10/26/13)

1.5 Hours –

Today, I went back to work on the cowl hinges.  I had already made the shims for the bottom hinges on the lower cowl, so I just needed to cut the actual hinges.  This was pretty easy to do since I already had the shims drilled and could use them to cut the hinges to length and match drill them.  Once the hinges were cut and drilled, I deburred, countersunk and dimpled the parts as needed, and then called it a day.

The two hinges that will hold the bottom of the lower cowl.

A closer view of the lower left hinge.